Weeks and weeks and weeks ago, I went to my favorite thrift store looking for home decor for my bland apartment. I got GREAT stuff that day, a photo frame, new fabric for hanging, these awesome paper lanterns, and this wood frame. I was convinced I could do something with it, if not turn it into a mirror, why not a chalkboard or a tray or simply stack it on the floor with other art pieces, I knew the possibilities were endless! Butttt I never got around to doing anything with it... UNTIL NOW! If you can imagine, I have half a ton of jewelry and with this new store, I plan to have a full ton quite soon! I hateee keeping jewelry in boxes, I have to much, it gets all tangled, there is never enough room... I hate having my litte earrings get lost and flung out of the dish I had... I hate finding that perfect earring match, just to find out there is no back on it.... SO I decided I would some how use this frame to make a jewelry holder. I thought and thought and this is what I came up with!
What: Chain Jewelry Holder
Cost: Free- Should be no more than $30 if you are frugal or already have craft supplies at home
Time: 10 minutes- Half a day if spray painting
Materials Needed:1 frame as long as you desire, could be an art frame, photo frame, frame you make yourself etc. (go the thrift store perhaps!)
1 foam board, color of your choice
Hot Glue gun and Hot Glue sticks
Scissors or razor blade
Chains- Can be from old necklaces, necklace chains from jewelry making or craft stores, any chain can do
Spray Paint- If you intend to paint your chains, the frame or even the back board to make it stand out
newspaper or cardboard
Picture Hanger- the metal piece that you nail it to give the hanger in the wall a place to rest, your frame may already have this
Hammer
Wall Picture Hanger- The metal piece you nail in the wall with a hook to hold the frame
How:
Prep: lay cardboard or newspaper down on hard surface, plug glue gun in
1. Turn your frame over so the back is facing up to the sky, notice the lip where the painting would go. Lay your chains across the frame, spread them out according to how many you have and how long your jewelry is. I put the first and last chain close to the frame to gain as much space as possible, I have 6 chains across my frame.

2. Glue one side of each chain down, be generous but discreet, you don't want glue showing in the front. Glue the other side, you don't have to go directly across, try diagonal, nor do they have to be pulled tight. Keep in mind that earring backs, necklaces or bracelets will pull the chain away from the back board so allow a slight looseness on the chains.

3. lay the foam board on the frame and mark where the foam board meets the frame, cut the foam board a half inch larger to allow for adequate gluing space. Glue the foam board to the frame.

4. Since you did not use the lip, there is a gap between the chains and the board, that is ideal for inserting earrings. But now you have a gap between the frame and the wall!! Use a piece of foam board to buffer that gap and nail the hanger to the foam board and the frame (like a sandwich) this should allow the frame to be hung normally. If you already have a hanger installed, use a bigger hook on the wall to let it accommodate the space.

5. WALA! Turn it over and admire your work! Start putting jewelry on it! I just put a pair of sunglasses! Use the chains for stud earrings and never lose a back again! Perfect for hang earrings, clasp your necklaces around them!!

6. Hang it on the wall near your dressing area or prop it up like I did!
Enjoy DIY Diva's!!